Welcome to HANKO!
TEL
0519-83336208

Gel Coat

Features and main uses:
GC-230 is a solution of isophthalic acid / neopentyl glycol unsaturated polyester in styrene: thixotropic agent has been added, which has good heat resistance, water resistance and cracking resistance. It is suitable for spray forming, and can be used to make waterproof board, heat-resistant bathtub, mould, etc.
Technical index of liquid resin(25℃):
Project Company Index Test Method
Viscosity Pas 1.9~2.9 JIS-K-6901.4.5
Gel time min 10.0~20.0 JIS-K-6901.4.8
Thixotropy index ... 4.5 JIS-K-6901.4.5
Physical properties of casting body:
Project Company Measured value Test Method
Proportion ... 1.18 JIS-K-7112
Shrinkage % 8.0  Calculation based on liquid / solid specific gravity
Water absorption % 0.17% JIS-K-7209
Tensile strength MPa 70 JIS-K-7113
Tensile modulus of elasticity MPa 3700 JIS-K-7113
Breaking extensibility % 2.8 JIS-K-7113
Bending strength MPa 123 JIS-K-7203
Bending modulus of elasticity MPa 3600 JIS-K-7203
Compressive strength MPa 142 JIS-K-7208
Hammer impact strength KJ/M² 21 JIS-K-7111
Hot deformation temperature 110 JIS-K-7207
Barcol hardness ... 45 JIS-K-6911
Note: 1. The preparation method is in accordance with GB / T8237-87,Curing system:Accelerator  6.0%CoNaph 0.5%, curing agent AKZO M-50 1.0%
2. Casting body post-treatment: 60 ℃×3 hours + 80 ℃×1 hours.
Matters needing attention:
1. Before use, please mix evenly in the packaging barrel or pour out all the resin in the packaging barrel and stir it evenly before use.
2. The product should be stored in a cool place below 25 ℃ to avoid fire and keep away from heat and radiation sources. The shelf life of products stored below 25 ℃ is 3 months.
In view of the diversity of application conditions, it is necessary for users to confirm the product performance. If you have any questions about the contents of this information or want to know more information, please contact our company. We reserve the right to modify the data.

http://czhkfrp.com/en/chanpinzhongxin_v133.html
上一条:-
下一条:-
Contact

Changzhou Hanke composite materials Co., Ltd
Address: No.23 middle Taihu Road, Xinbei District, Changzhou
Tel: 0519-83336208
Mobile phone: 13906112192
Email: 2398589903@qq.com

Copyright © 2020 Changzhou Hanke composite materials Co., Ltd   苏ICP备19000033444号