HN-H-1001(N)
|
Features and main uses：
|
|
HN-H-1001 (N) resin is a kind of o-benzene unsaturated polyester resin with medium viscosity. Its FRP products have good mechanical strength, high elongation and strong versatility, which are suitable for the production of filament wound (sand) FRP pipes and various ordinary glass fiber reinforced plastic products by hand.
|
|
Technical index of liquid resin:
|
|
Project
|
Company
|
Index
|
Test Method
|
|
Appearance
|
...
|
Light yellow transparent liquid
|
...
|
|
Viscosity（25℃）
|
Pa•s
|
0.3~0.45
|
GB/T7193.4.1
|
|
Acid value
|
mgKOH/g
|
25.0~33.0
|
GB/T2895
|
|
Gel time（25℃）
|
min
|
9.1~16.9
|
GB/T7193.4.6
|
|
Solid content
|
...
|
（61.0~67.0）%
|
GB/T7193.4.3
|
|
|
|
Physical properties of casting body:
|
|
Project
|
Company
|
Measured value
|
Test Method
|
|
Tensile strength
|
MPa
|
≥60
|
GB/T2567-2008
|
|
Tensile modulus of elasticity
|
MPa
|
≥2500
|
GB/T2567-2008
|
|
Breaking extensibility
|
...
|
≥3.5%
|
GB/T2567-2008
|
|
Hot deformation temperature
|
℃
|
≥65
|
GB/T1634-2004
|
|
Barcol hardness
|
...
|
≥40
|
GB/T3854-2005
|
|
Note: 1. The preparation method is in accordance with GB / T8237-2005, curing system: Accelerator RCA 1.0%, curing agent Butanox M-50 1.0%.
|
|
2. Casting body post-treatment: room temperature×24 hours + 60 ℃×3 hours + 90 ℃×1 hours.
|
|
|
|
Reference formula:
|
|
HN-H-1001(N) resin 100 copies；Curing agent （MEKPO） 2 copies；Accelerator RCA 1~4 copies(dosage depends on temperature)
|
|
|
|
Matters needing attention:
|
|
1. High efficiency colorless accelerator should be avoided in the selection of accelerators, otherwise poor curing of products will easily lead to surface sticking, so RCA and other special accelerators for FRP should be selected.
|
|
2. When the construction environment humidity is high or the temperature is high, it is easy to cause the surface to become sticky. At this time, rs-402 wax can be properly added, and the recommended addition amount is 0.4 ~ 0.8%.
|
|
3. The product should be stored in a cool place below 25 ℃ to avoid fire and keep away from heat and radiation sources. The shelf life of products stored below 25 ℃ is 3 months.
|
|
|
|
In view of the diversity of application conditions, it is necessary for users to confirm the product performance. If you have any questions about the contents of this information or want to know more information, please contact our company. We reserve the right to modify the data.
|
http://czhkfrp.com/en/chanpinzhongxin_v246.html
