Welcome to HANKO!
TEL
0519-83336208

HK-601

Features and main uses:
The resin has excellent transparency, low exothermic peak during curing, slow hardening process and good processability. It is suitable for the production of translucent, three-dimensional artificial marble / agate products (e.g. face wash and make-up table, kitchen table panel, bathtub).
Technical index of liquid resin(25℃):
Project Company Index Test Method
Appearance ... Light yellow liquid ...
Viscosity Pas 0.55~0.8 GB/T7193.4.1
Gel time min 5.0~8.0 GB/T7193.4.6
Note: gel time test:Resin 100g;Accelerator 1.0%Co 2.0g;Curing agent Butanox M-50 1g
Physical properties of casting body:
Project Company Measured value Test Method
Tensile strength MPa 66 GB/T2567-2008
Tensile modulus of elasticity MPa 4060 GB/T2567-2008
Breaking extensibility ... 1.70% GB/T2567-2008
Bending strength MPa 108 GB/T2567-2008
Bending modulus of elasticity MPa 3900 GB/T2567-2008
Hot deformation temperature 90 GB/T1634-2004
Barcol hardness ... 47 GB/T3854-2005
Note: 1. The preparation method is in accordance with GB / T8237-2005, curing system: Accelerator 2.0%, curing agent Butanox M-50 1.0%.
2. Casting body post-treatment: room temperature×24 hours + 60 ℃×3 hours + 90 ℃×1 hours.
Matters needing attention:
1. When the construction environment temperature is high and the gel time is short, the dosage of curing agent can not be reduced, and the inhibitor should be added as needed. When the surface is sticky, proper wax solution should be added.
2. The product should be stored in a cool place below 25 ℃ to avoid fire and keep away from heat and radiation sources. The shelf life of products stored below 25 ℃ is 3 months.
In view of the diversity of application conditions, it is necessary for users to confirm the product performance. If you have any questions about the contents of this information or want to know more information, please contact our company. We reserve the right to modify the data.

http://czhkfrp.com/en/chanpinzhongxin_v303.html
上一条:-
下一条:HK-604
Contact

Changzhou Hanke composite materials Co., Ltd
Address: No.23 middle Taihu Road, Xinbei District, Changzhou
Tel: 0519-83336208
Mobile phone: 13906112192
Email: 2398589903@qq.com

Copyright © 2020 Changzhou Hanke composite materials Co., Ltd   苏ICP备19000033444号