Welcome to HANKO!
TEL
0519-83336208

HS-1045

Features and main uses:
HS-1045 is an o-benzene unsaturated polyester resin with high strength and toughness, which is suitable for general hand laid FRP products.
Technical index of liquid resin:
Project Company Index Test Method
Appearance ... Transparent yellow liquid ...
Viscosity(25℃) Pas 0.3~0.45 GB/T7193.4.1
Gel time(25℃) min 9.1~16.9 GB/T7193.4.6
Physical properties of casting body:
Project Company Measured value Test Method
Tensile strength MPa 69.1  GB/T2567-2008
Tensile modulus of elasticity MPa 2900 GB/T2567-2008
Breaking extensibility ... 5.89% GB/T2567-2008
Bending strength MPa 120.3  GB/T2567-2008
Impact strength KJ/m² 14.7  GB/T2567-2008
Hot deformation temperature 63.5 GB/T1634-2004
Barcol hardness ... 38 GB/T3854-2005
Note: 1. The preparation method is in accordance with GB / T8237-2005, curing system: Accelerator RCA 1.0%, curing agent Butanox M-50 1.0%.
2. Casting body post-treatment: room temperature×24 hours + 60 ℃×3 hours + 80 ℃×1 hours.
Reference formula:
HS-1045 resin 100 copies;Curing agent (MEKPO) 1 ~ 2 copies (dosage depends on temperature);Accelerator RCA 1~4 copies(dosage depends on temperature)
Matters needing attention:
1. In the selection of accelerators, high-efficiency colorless accelerators should be avoided, otherwise, poor curing of products will easily lead to surface sticking, and RCA and other special accelerators for FRP should be selected.
2. When the construction environment humidity is high or the temperature is high, it is easy to cause surface stickiness. At this time, rs-102 wax can be properly added, and the recommended addition amount is 0.4 ~ 0.8%
3. The product should be stored in a cool place below 25 ℃ to avoid fire and keep away from heat and radiation sources. The shelf life of products stored below 25 ℃ is 3 months.
In view of the diversity of application conditions, it is necessary for users to confirm the product performance. If you have any questions about the contents of this information or want to know more information, please contact our company. We reserve the right to modify the data.
http://czhkfrp.com/en/chanpinzhongxin_v312.html
上一条:HR-191
下一条:TM-196FRP
Contact

Changzhou Hanke composite materials Co., Ltd
Address: No.23 middle Taihu Road, Xinbei District, Changzhou
Tel: 0519-83336208
Mobile phone: 13906112192
Email: 2398589903@qq.com

Copyright © 2020 Changzhou Hanke composite materials Co., Ltd   苏ICP备19000033444号